Maretron Pressure Transducer 0 to 1.5 PSI (FPM100 Accessory) PT-0-1.5PSI-01

Maretron Pressure Transducer 0 to 1.5 PSI (FPM100 Accessory) PT-0-1.5PSI-01

Maretron Fluid Pressure Sensor Transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network

Available Models

PT-0-3PSI-01    Pressure Transducer 0 to 3 PSI
PT-0-5PSI-01    Pressure Transducer 0 to 5 PSI
PT-0-10PSI-01   Pressure Transducer 0 to 10 PSI
PT-0-50PSI-01   Pressure Transducer 0 to 50 PSI
PT-0-100PSI-01  Pressure Transducer 0 to 100 PSI
PT-0-500PSI-01  Pressure Transducer 0 to 500 PSI
PT-0-1000PSI-01 Pressure Transducer 0 to 1000 PSI
PT-0-5000PSI-01 Pressure Transducer 0 to 5000 PSI

Maretron pressure transducers are not approved for use with gasoline. If you wish to use the FPM100 to monitor pressures or levels of gasoline, you must obtain a pressure transducer that is approved for use with gasoline.

Note that diesel fuel is lighter than water, and so the maximum tank depth can be increased by about 10% when these sensors are used to measure diesel fuel tanks.

As your needs change - a child wants a new bed, or maybe a sibling arrives - the bed can keep up with the new needs.

Choose the bed you want to convert and see the conversion options in the bed converter.

We guarantee a five-year availability of the standard conversion kits for all convertible beds from the date of purchase.

Tested and approved according to safety standard EN 747-1:2012+A1:2015.

According to EN 747 loft beds and the upper bed of bunk beds are not suitable for children under 6 years due to the risk of injury from falls.

A smaller child can sleep in the lower bed of bunk beds, possibly with a bed guard for extra safety.